Skip to content
  • There are no suggestions because the search field is empty.

How To Update V3 Timing Gate Firmware

Important
Do not unplug or turn off the timing gate during the update. Wait until the updater confirms the update is complete.

Use the V3 Timing Gate Updater to install the latest firmware on your timing gate.

  1. Download the updater here:

    V3 Timing Gate Firmware Updater

  2. Choose the version for your computer:
    1. Windows: download the Windows updater
    2. Silicon Mac: download the Mac updater

Opening the V3 Timing Gate Updater on Mac

You may see this message
“V3 Timing Gate Updater” Not Opened. Apple could not verify “V3 Timing Gate Updater” is free of malware that may harm your Mac or compromise your privacy.

Screenshot 2026-11-18 at 9.46.53 am

To resolve

  1. Drag “V3 Timing Gate Updater” from the .dmg into your Applications folder.
  2. Open the app from Applications. When the warning appears, click Done.
  3. Go to System Settings > Privacy & Security.
  4. Scroll to Security and click Open Anyway next to the V3 Timing Gate Updater message. Enter your Mac password.
  5. Open the app again and click Open.

Before You Start

Make sure you have:

  • The V3 Timing Gate Updater
  • A USB cable
  • Your timing gate

Update Steps

  1. Open the V3 Timing Gate Updater program.
  2. Plug the timing gate into your computer using USB.
  3. Turn the timing gate on.
  4. Click the refresh button in the updater to find the timing gate.
  5. Once the timing gate is detected, click Update Firmware.
  6. Keep the timing gate plugged in and turned on while the update runs.
  7. Wait until the updater says the update is complete and the timing gate has restarted.
  8. You can now close the updater.

If the Gate Is Not Found

  • Check that the USB cable is connected properly.
  • Make sure the timing gate is turned on.
  • Click the refresh button again.
  • If it still is not found, open Select device manually or view log and choose the device port from the dropdown.